printf '

' | fink --no-use-binary-dist --yes  --build-as-nobody rebuild fpc-config 2>&1
The package 'fpc-config' will be built without being installed.
Reading build dependency for fpc-config-2.6.4-2...
Reading dependency for fpc-config-2.6.4-2...
Reading build conflict for fpc-config-2.6.4-2...
The following package will be rebuilt:
 fpc-config
curl --connect-timeout 30 -f -L -A 'fink/0.37.0' -O http://distfiles.master.finkmirrors.net/distfiles/gpl-2.0.txt
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  6 18092    6  1193    0     0   1421      0  0:00:12 --:--:--  0:00:12  1420
100 18092  100 18092    0     0  19455      0 --:--:-- --:--:-- --:--:-- 19453
curl --connect-timeout 30 -f -L -A 'fink/0.37.0' -O http://distfiles.master.finkmirrors.net/distfiles/lgpl-2.0.txt
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 25383  100 25383    0     0  75493      0 --:--:-- --:--:-- --:--:-- 75544
Setting runtime build-lock...
dpkg-deb -b /sw/build.build/root-fink-buildlock-fpc-config-2.6.4-2 /sw/build.build
dpkg-deb: building package `fink-buildlock-fpc-config-2.6.4-2' in `/sw/build.build/fink-buildlock-fpc-config-2.6.4-2_2014.07.26-06.14.20_darwin-x86_64.deb'.
Installing build-lock package...
/sw/bin/dpkg-lockwait -i /sw/build.build/fink-buildlock-fpc-config-2.6.4-2_2014.07.26-06.14.20_darwin-x86_64.deb
Selecting previously deselected package fink-buildlock-fpc-config-2.6.4-2.
(Reading database ... 7370 files and directories currently installed.)
Unpacking fink-buildlock-fpc-config-2.6.4-2 (from .../fink-buildlock-fpc-config-2.6.4-2_2014.07.26-06.14.20_darwin-x86_64.deb) ...
Setting up fink-buildlock-fpc-config-2.6.4-2 (2014.07.26-06.14.20) ...

sudo -u fink-bld [ENV] sh -c /tmp/fink.wzJJs
cp /sw/src/gpl-2.0.txt .
sudo -u fink-bld [ENV] sh -c /tmp/fink._wJSN
cp /sw/src/lgpl-2.0.txt .
sudo -u fink-bld [ENV] sh -c /tmp/fink.e1EXK
/tmp/fink.nC7_A
#!/bin/sh -ev

# The version number of darwin (8 for 10.4, 9 for 10.5, ...) 
# is needed for the directories of the gcc libraries
DARWINVERSION=`uname -r|cut -f1 -d.`
uname -r|cut -f1 -d.

# create the default fpc.cfg file
cat >/sw/build.build/fpc-config-2.6.4-2/fpc.cfg <<EOFCFG
#
# Example fpc.cfg for Free Pascal Compiler
#

# ----------------------
# Defines (preprocessor)
# ----------------------

#
# nested #IFNDEF, #IFDEF, #ENDIF, #ELSE, #DEFINE, #UNDEF are allowed
#
# -d is the same as #DEFINE
# -u is the same as #UNDEF
#

#
# Some examples (for switches see below, and the -? helppages)
#
# Try compiling with the -dRELEASE or -dDEBUG on the commandline
#

# For a release compile with optimizes and strip debuginfo
#IFDEF RELEASE
  -O2
  -Xs
  #WRITE Compiling Release Version
#ENDIF

# For a debug version compile with debuginfo and all codegeneration checks on
#IFDEF DEBUG
  -g
  -Crtoi
  #WRITE Compiling Debug Version
#ENDIF

# assembling
#ifdef darwin
# use pipes instead of temporary files for assembling
-ap
#endif

# ----------------
# Parsing switches
# ----------------

# Pascal language mode
#      -Mfpc      free pascal dialect (default)
#      -Mobjfpc   switch some Delphi 2 extensions on
#      -Mdelphi   tries to be Delphi compatible
#      -Mtp       tries to be TP/BP 7.0 compatible
#      -Mgpc      tries to be gpc compatible
#      -Mmacpas   tries to be compatible to the macintosh pascal dialects
#
# Turn on Object Pascal extensions by default
#-Mobjfpc

# Assembler reader mode
#      -Rdefault  use default assembler
#      -Ratt      read AT&T style assembler
#      -Rintel    read Intel style assembler
#
# All assembler blocks are AT&T styled by default
#-Ratt

# Semantic checking
#      -S2        same as -Mobjfpc
#      -Sc        supports operators like C (*=,+=,/= and -=)
#      -Sa        include assertion code.
#      -Sd        same as -Mdelphi
#      -Se<x>     error options. <x> is a combination of the following:
#         <n> : compiler stops after <n> errors (default is 1)
#         w   : compiler stops also after warnings
#         n   : compiler stops also after notes
#         h   : compiler stops also after hints
#      -Sg        allow LABEL and GOTO
#      -Sh        Use ansistrings
#      -Si        support C++ styled INLINE
#      -Sk        load fpcylix unit
#      -SI<x>     set interface style to <x>
#         -SIcom    COM compatible interface (default)
#         -SIcorba  CORBA compatible interface
#      -Sm        support macros like C (global)
#      -So        same as -Mtp
#      -Sp        same as -Mgpc
#      -Ss        constructor name must be init (destructor must be done)
#      -Sx        enable exception keywords (default in Delphi/ObjFPC modes)
#
# Allow goto, inline, C-operators, C-vars
-Sgic

# ---------------
# Code generation
# ---------------

# Uncomment the next line if you always want static/dynamic units by default
# (can be overruled with -CD, -CS at the commandline)
#-CS
#-CD

# Set the default heapsize to 8Mb
#-Ch8000000

# Set default codegeneration checks (iocheck, overflow, range, stack)
#-Ci
#-Co
#-Cr
#-Ct

# Optimizer switches
# -Os        generate smaller code
# -Oa=N      set alignment to N
# -O1        level 1 optimizations (quick optimizations, debuggable)
# -O2        level 2 optimizations (-O1 + optimizations which make debugging more difficult)
# -O3        level 3 optimizations (-O2 + optimizations which also may make the program slower rather than faster)
# -Oo<x>     switch on optimalization x. See fpc -i for possible values
# -OoNO<x>   switch off optimalization x. See fpc -i for possible values
# -Op<x>     set target cpu for optimizing, see fpc -i for possible values
#
# See "fpc -i" also for more fine-grained control over which optimizations
# to perform

#ifdef darwin
#ifdef cpui386
-Cppentiumm
-Oppentiumm
#endif
#endif

# -----------------------
# Set Filenames and Paths
# -----------------------

# Both slashes and backslashes are allowed in paths

# path to the messagefile, not necessary anymore but can be used to override
# the default language
#-Fr%p/lib/fpc/\$fpcversion/msg/errore.msg
#-Fr%p/lib/fpc/\$fpcversion/msg/errorn.msg
#-Fr%p/lib/fpc/\$fpcversion/msg/errores.msg
#-Fr%p/lib/fpc/\$fpcversion/msg/errord.msg
#-Fr%p/lib/fpc/\$fpcversion/msg/errorr.msg

# searchpath for units and other system dependent things
-Fu/sw/lib/fpc/2.6.4/units/\$FPCTARGET
-Fu/sw/lib/fpc/2.6.4/units/\$FPCTARGET/*
-Fu/sw/lib/fpc/2.6.4/units/\$FPCTARGET/rtl
#-Fu~/fpc/rtl/units/

#ifdef FPCAPACHE_1_3
-Fu/sw/lib/fpc/\$fpcversion/units/\$fpctarget/httpd13/
#else
#ifdef FPCAPACHE_2_0
-Fu/sw/lib/fpc/\$fpcversion/units/\$fpctarget/httpd20
#else
-Fu/sw/lib/fpc/\$fpcversion//units/\$fpctarget/httpd22
#endif
#endif

# searchpath for fppkg user-specific packages
-Fu~/.fppkg/lib/fpc/\$fpcversion/units/\$fpctarget/*

# path to the gcclib
#ifdef cpupowerpc
-Fl/usr/lib/gcc/powerpc-apple-darwin$DARWINVERSION/4.2.1
-Fl/usr/lib/gcc/powerpc-apple-darwin$DARWINVERSION/4.0.1
#endif
#ifdef cpupowerpc64
-Fl/usr/lib/gcc/powerpc-apple-darwin$DARWINVERSION/4.2.1/ppc64
-Fl/usr/lib/gcc/powerpc-apple-darwin$DARWINVERSION/4.0.1/ppc64
#endif
#ifdef cpui386
-Fl/usr/lib/gcc/i686-apple-darwin$DARWINVERSION/4.2.1
-Fl/usr/lib/gcc/i686-apple-darwin$DARWINVERSION/4.0.1
#endif
#ifdef cpux86_64
-Fl/usr/lib/gcc/i686-apple-darwin$DARWINVERSION/4.2.1/x86_64
-Fl/usr/lib/gcc/i686-apple-darwin$DARWINVERSION/4.0.1/x86_64
#endif

# searchpath for libraries

#-Fl/opt/lib
#-Fl/pp/lib
#-Fl/lib

-Fl/usr/lib

-Fl/usr/X11/lib
-Fl/usr/X11R6/lib
-Fl/opt/X11/lib

-Fl/sw/lib

# searchpath for tools
-FD/sw/lib/fpc/\$fpcversion/bin/\$fpctarget

# set binutils prefix
$CPUCROSSIFDEF1
$CPUCROSSIFDEF2

# binutils prefix for cross compiling
#IFDEF FPC_CROSSCOMPILING
#IFDEF NEEDCROSSBINUTILS
  -XP\$fpctarget-
#ENDIF NEEDCROSSBINUTILS
#ENDIF

# -------------
# Linking
# -------------

# generate always debugging information for GDB (slows down the compiling
# process)
#      -gc        generate checks for pointers
#      -gd        use dbx
#      -gg        use gsym
#      -gh        use heap trace unit (for memory leak debugging)
#      -gl        use line info unit to show more info for backtraces
#      -gv        generates programs tracable with valgrind
#      -gw        generate dwarf debugging info
#
# Enable debuginfo and use the line info unit by default
#-gl

# always pass an option to the linker
#-k-s

# Always strip debuginfo from the executable
#-Xs

# -------------
# Miscellaneous
# -------------

# Write always a nice FPC logo ;)
-l

# Verbosity
#      e : Show errors (default)       d : Show debug info
#      w : Show warnings               u : Show unit info
#      n : Show notes                  t : Show tried/used files
#      h : Show hints                  s : Show time stamps
#      i : Show general info           q : Show message numbers
#      l : Show linenumbers            c : Show conditionals
#      a : Show everything             0 : Show nothing (except errors)
#      b : Write file names messages   r : Rhide/GCC compatibility mode
#          with full path              x : Executable info (Win32 only)
#      v : write fpcdebug.txt with     p : Write tree.log with parse tree
#          lots of debugging info
#
# Display Info, Warnings and Notes
-viwn
# If you don't want so much verbosity use
#-vw

#
# That's all folks
#
EOFCFG
/bin/rm -rf /sw/build.build/root-fpc-config-2.6.4-2
/bin/mkdir -p /sw/build.build/root-fpc-config-2.6.4-2/sw
/bin/mkdir -p /sw/build.build/root-fpc-config-2.6.4-2/DEBIAN
/usr/sbin/chown -R fink-bld:fink-bld /sw/build.build/root-fpc-config-2.6.4-2
sudo -u fink-bld [ENV] sh -c /tmp/fink.U97yG
/tmp/fink.IGeyw
#!/bin/sh -ev
  mkdir /sw/build.build/root-fpc-config-2.6.4-2/sw/etc
  install -c -m 644 /sw/build.build/fpc-config-2.6.4-2/fpc.cfg /sw/build.build/root-fpc-config-2.6.4-2/sw/etc/
sudo -u fink-bld [ENV] sh -c /tmp/fink.XdIFO
/usr/bin/install -d -m 700 /sw/build.build/root-fpc-config-2.6.4-2/sw/share/doc/fpc-config
/bin/cp -r gpl-2.0.txt /sw/build.build/root-fpc-config-2.6.4-2/sw/share/doc/fpc-config/
/bin/cp -r lgpl-2.0.txt /sw/build.build/root-fpc-config-2.6.4-2/sw/share/doc/fpc-config/
/bin/chmod -R go=u-w /sw/build.build/root-fpc-config-2.6.4-2/sw/share/doc/fpc-config
/bin/rm -f /sw/build.build/root-fpc-config-2.6.4-2/sw/info/dir /sw/build.build/root-fpc-config-2.6.4-2/sw/info/dir.old /sw/build.build/root-fpc-config-2.6.4-2/sw/share/info/dir /sw/build.build/root-fpc-config-2.6.4-2/sw/share/info/dir.old
Reverting ownership of install dir to root
Writing control file...
Writing conffiles list...
Writing md5sums file...
env LANG=C LC_ALL=C dpkg-deb -b root-fpc-config-2.6.4-2 /sw/fink/10.9/stable/main/binary-darwin-x86_64/languages
dpkg-deb: building package `fpc-config' in `/sw/fink/10.9/stable/main/binary-darwin-x86_64/languages/fpc-config_2.6.4-2_darwin-x86_64.deb'.
Removing runtime build-lock...
Removing build-lock package...
/sw/bin/dpkg-lockwait -r fink-buildlock-fpc-config-2.6.4-2
(Reading database ... 7371 files and directories currently installed.)
Removing fink-buildlock-fpc-config-2.6.4-2 ...