printf '

' | fink --no-use-binary-dist --yes  --build-as-nobody rebuild mime-base64-pm5162 2>&1
The package 'mime-base64-pm5162' will be built without being installed.
Reading build dependency for mime-base64-pm5162-3.05-104...
Reading dependency for mime-base64-pm5162-3.05-104...
Reading dependency for mime-base64-pm5162-bin-3.05-104...
Reading build conflict for mime-base64-pm5162-3.05-104...
The following package will be rebuilt:
 mime-base64-pm5162
Setting runtime build-lock...
dpkg-deb -b /sw/build.build/root-fink-buildlock-mime-base64-pm5162-3.05-104 /sw/build.build
dpkg-deb: building package `fink-buildlock-mime-base64-pm5162-3.05-104' in `/sw/build.build/fink-buildlock-mime-base64-pm5162-3.05-104_2014.08.01-20.10.00_darwin-x86_64.deb'.
Installing build-lock package...
/sw/bin/dpkg-lockwait -i /sw/build.build/fink-buildlock-mime-base64-pm5162-3.05-104_2014.08.01-20.10.00_darwin-x86_64.deb
Selecting previously deselected package fink-buildlock-mime-base64-pm5162-3.05-104.
(Reading database ... 4296 files and directories currently installed.)
Unpacking fink-buildlock-mime-base64-pm5162-3.05-104 (from .../fink-buildlock-mime-base64-pm5162-3.05-104_2014.08.01-20.10.00_darwin-x86_64.deb) ...
Setting up fink-buildlock-mime-base64-pm5162-3.05-104 (2014.08.01-20.10.00) ...

sudo -u fink-bld [ENV] sh -c /tmp/fink.X1IVB
env LANG=C LC_ALL=C /sw/bin/tar  --no-same-owner --no-same-permissions -xvf /sw/src/MIME-Base64-3.05.tar.gz
MIME-Base64-3.05/
MIME-Base64-3.05/t/
MIME-Base64-3.05/t/warn.t
MIME-Base64-3.05/t/bad-sv.t
MIME-Base64-3.05/t/unicode.t
MIME-Base64-3.05/t/quoted-print.t
MIME-Base64-3.05/t/base64.t
MIME-Base64-3.05/README
MIME-Base64-3.05/QuotedPrint.pm
MIME-Base64-3.05/MANIFEST
MIME-Base64-3.05/decode-qp
MIME-Base64-3.05/encode-base64
MIME-Base64-3.05/encode-qp
MIME-Base64-3.05/Base64.pm
MIME-Base64-3.05/Changes
MIME-Base64-3.05/Makefile.PL
MIME-Base64-3.05/decode-base64
MIME-Base64-3.05/Base64.xs
sudo -u fink-bld [ENV] sh -c /tmp/fink.nKljf
ARCHFLAGS="" /usr/bin/arch -x86_64 perl5.16 Makefile.PL PERL="/usr/bin/arch -x86_64 perl5.16" PREFIX=/sw INSTALLPRIVLIB=/sw/lib/perl5/5.16.2 INSTALLARCHLIB=/sw/lib/perl5/5.16.2/darwin-thread-multi-2level INSTALLSITELIB=/sw/lib/perl5/5.16.2 INSTALLSITEARCH=/sw/lib/perl5/5.16.2/darwin-thread-multi-2level INSTALLMAN1DIR=/sw/share/man/man1 INSTALLMAN3DIR=/sw/share/man/man3 INSTALLSITEMAN1DIR=/sw/share/man/man1 INSTALLSITEMAN3DIR=/sw/share/man/man3 INSTALLBIN=/sw/bin INSTALLSITEBIN=/sw/bin INSTALLSCRIPT=/sw/bin
Checking if your kit is complete...
Looks good
Writing Makefile for MIME::Base64
Writing MYMETA.yml and MYMETA.json
make CC=gcc CXX=g++
/usr/bin/arch -x86_64 perl5.16 /System/Library/Perl/5.16/ExtUtils/xsubpp  -typemap /System/Library/Perl/5.16/ExtUtils/typemap  Base64.xs > Base64.xsc && mv Base64.xsc Base64.c
Running Mkbootstrap for MIME::Base64 ()
cp decode-qp blib/script/decode-qp
cp encode-qp blib/script/encode-qp
/usr/bin/arch -x86_64 perl5.16 -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/encode-qp
/usr/bin/arch -x86_64 perl5.16 -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/decode-qp
cp decode-base64 blib/script/decode-base64
cp encode-base64 blib/script/encode-base64
/usr/bin/arch -x86_64 perl5.16 -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/decode-base64
/usr/bin/arch -x86_64 perl5.16 -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/encode-base64
chmod 644 Base64.bs
cp Base64.bs blib/arch/auto/MIME/Base64/Base64.bs
chmod 644 blib/arch/auto/MIME/Base64/Base64.bs
cp QuotedPrint.pm blib/lib/MIME/QuotedPrint.pm
cp Base64.pm blib/lib/MIME/Base64.pm
gcc -c   -g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -fstack-protector -I/usr/local/include -Os   -DVERSION=\"3.05\" -DXS_VERSION=\"3.05\"  "-I/System/Library/Perl/5.16/darwin-thread-multi-2level/CORE"   Base64.c
rm -f blib/arch/auto/MIME/Base64/Base64.bundle
cc -mmacosx-version-min=10.9  -bundle -undefined dynamic_lookup -L/usr/local/lib -fstack-protector Base64.o  -o blib/arch/auto/MIME/Base64/Base64.bundle 	\
	     	\
	  
ld: warning: directory not found for option '-L/usr/local/lib'
chmod 755 blib/arch/auto/MIME/Base64/Base64.bundle
Manifying blib/man3/MIME::QuotedPrint.3pm
Manifying blib/man3/MIME::Base64.3pm
/bin/rm -rf /sw/build.build/root-mime-base64-pm5162-3.05-104
/bin/mkdir -p /sw/build.build/root-mime-base64-pm5162-3.05-104/sw
/bin/mkdir -p /sw/build.build/root-mime-base64-pm5162-3.05-104/DEBIAN
/usr/sbin/chown -R fink-bld:fink-bld /sw/build.build/root-mime-base64-pm5162-3.05-104
sudo -u fink-bld [ENV] sh -c /tmp/fink.g6EUj
make -j1 install PREFIX=/sw INSTALLPRIVLIB=/sw/lib/perl5/5.16.2 INSTALLARCHLIB=/sw/lib/perl5/5.16.2/darwin-thread-multi-2level INSTALLSITELIB=/sw/lib/perl5/5.16.2 INSTALLSITEARCH=/sw/lib/perl5/5.16.2/darwin-thread-multi-2level INSTALLMAN1DIR=/sw/share/man/man1 INSTALLMAN3DIR=/sw/share/man/man3 INSTALLSITEMAN1DIR=/sw/share/man/man1 INSTALLSITEMAN3DIR=/sw/share/man/man3 INSTALLBIN=/sw/bin INSTALLSITEBIN=/sw/bin INSTALLSCRIPT=/sw/bin DESTDIR=/sw/build.build/root-mime-base64-pm5162-3.05-104
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/lib/perl5/5.16.2/darwin-thread-multi-2level/auto/MIME/Base64/Base64.bs
Installing /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/lib/perl5/5.16.2/darwin-thread-multi-2level/auto/MIME/Base64/Base64.bundle
Installing /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/lib/perl5/5.16.2/darwin-thread-multi-2level/MIME/Base64.pm
Installing /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/lib/perl5/5.16.2/darwin-thread-multi-2level/MIME/QuotedPrint.pm
Installing /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/share/man/man3/MIME::Base64.3pm
Installing /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/share/man/man3/MIME::QuotedPrint.3pm
Installing /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/bin/decode-base64
Installing /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/bin/decode-qp
Installing /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/bin/encode-base64
Installing /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/bin/encode-qp
Appending installation info to /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/lib/perl5/5.16.2/darwin-thread-multi-2level/perllocal.pod
mv /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/share/man /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/lib/perl5/5.16.2
sudo -u fink-bld [ENV] sh -c /tmp/fink.IKIFJ
/bin/mkdir -p /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/share/podfiles/5.16.2
for i in `find /sw/build.build/root-mime-base64-pm5162-3.05-104/sw -name perllocal.pod`; do /bin/cat $i | sed -e s,/sw/build.build/root-mime-base64-pm5162-3.05-104/sw/lib/perl5,/sw/lib/perl5, >> /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/share/podfiles/5.16.2/perllocal.mime-base64-pm5162.pod; /bin/rm -rf $i; done;
/usr/bin/install -d -m 700 /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/share/doc/mime-base64-pm5162
/bin/cp -r Changes /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/share/doc/mime-base64-pm5162/
/bin/cp -r README /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/share/doc/mime-base64-pm5162/
/bin/chmod -R go=u-w /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/share/doc/mime-base64-pm5162
/bin/rm -f /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/info/dir /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/info/dir.old /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/share/info/dir /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/share/info/dir.old
/bin/rm -rf /sw/build.build/root-mime-base64-pm5162-bin-3.05-104
/bin/mkdir -p /sw/build.build/root-mime-base64-pm5162-bin-3.05-104/sw
/bin/mkdir -p /sw/build.build/root-mime-base64-pm5162-bin-3.05-104/DEBIAN
/usr/sbin/chown -R fink-bld:fink-bld /sw/build.build/root-mime-base64-pm5162-bin-3.05-104
sudo -u fink-bld [ENV] sh -c /tmp/fink.osAWb
/usr/bin/install -d -m 755 /sw/build.build/root-mime-base64-pm5162-bin-3.05-104/sw
/bin/mv /sw/build.build/root-mime-base64-pm5162-3.05-104/sw/bin /sw/build.build/root-mime-base64-pm5162-bin-3.05-104/sw/
/usr/bin/install -d -m 700 /sw/build.build/root-mime-base64-pm5162-bin-3.05-104/sw/share/doc/mime-base64-pm5162-bin
/bin/cp -r Changes /sw/build.build/root-mime-base64-pm5162-bin-3.05-104/sw/share/doc/mime-base64-pm5162-bin/
/bin/cp -r README /sw/build.build/root-mime-base64-pm5162-bin-3.05-104/sw/share/doc/mime-base64-pm5162-bin/
/bin/chmod -R go=u-w /sw/build.build/root-mime-base64-pm5162-bin-3.05-104/sw/share/doc/mime-base64-pm5162-bin
/bin/rm -f /sw/build.build/root-mime-base64-pm5162-bin-3.05-104/sw/info/dir /sw/build.build/root-mime-base64-pm5162-bin-3.05-104/sw/info/dir.old /sw/build.build/root-mime-base64-pm5162-bin-3.05-104/sw/share/info/dir /sw/build.build/root-mime-base64-pm5162-bin-3.05-104/sw/share/info/dir.old
Reverting ownership of install dir to root
Writing control file...
Writing package script postinst...
Writing package script postrm...
Writing md5sums file...
env LANG=C LC_ALL=C dpkg-deb -b root-mime-base64-pm5162-3.05-104 /sw/fink/10.9/stable/main/binary-darwin-x86_64/libs/perlmods
dpkg-deb: building package `mime-base64-pm5162' in `/sw/fink/10.9/stable/main/binary-darwin-x86_64/libs/perlmods/mime-base64-pm5162_3.05-104_darwin-x86_64.deb'.
Reverting ownership of install dir to root
Writing control file...
Writing md5sums file...
env LANG=C LC_ALL=C dpkg-deb -b root-mime-base64-pm5162-bin-3.05-104 /sw/fink/10.9/stable/main/binary-darwin-x86_64/libs/perlmods
dpkg-deb: building package `mime-base64-pm5162-bin' in `/sw/fink/10.9/stable/main/binary-darwin-x86_64/libs/perlmods/mime-base64-pm5162-bin_3.05-104_darwin-x86_64.deb'.
Removing runtime build-lock...
Removing build-lock package...
/sw/bin/dpkg-lockwait -r fink-buildlock-mime-base64-pm5162-3.05-104
(Reading database ... 4297 files and directories currently installed.)
Removing fink-buildlock-mime-base64-pm5162-3.05-104 ...